Energy Storage System Cooling(7.5-20.5kW)
Special designed for power control equipment, energy storage container, and small data room, help to adjust and control the battery temperature to improve the safety and stability of battery operation. It adopts integrated design, complete isolation from inside and outside, provides IP20 or IP55 protection, suitable for multi-scenario installation. ( Watch the introduction video on YouTube )
Email Us
- Product description
- Features
- Specifications
- Certification
- Download
-
Special designed for power control equipment, energy storage container, and small data room, help to adjust and control the battery temperature to improve the safety and stability of battery operation. It adopts integrated design, complete isolation from inside and outside, provides IP20 or IP55 protection, suitable for multi-scenario installation. ( Watch the introduction video on YouTube )
-
Convenient and reliable
● Integrated design, plug and play, complete isolation from inside and outside.
● Open protocol, support control according to cell temperature, more flexible on-site application.
● Independent cooling and heating set point control, closer to the actual operation of the battery.
● High protection level - IP55 protection level to ensure the dustproof and waterproof reliability of the chassis.
● The exterior of the chassis is sprayed with outdoor powder to improve the weather resistance and corrosion resistance of the unit.
● The EC fan has a large air volume and high residual pressure design, which can cope with the situation of adding air ducts on site.● Adapt to local conditions
● Support multi-scene installation: wall-mounted, floor-standing, ceiling-mounted, indoor/outdoor.Energy saving and environmental protection
● True frequency conversion, more energy efficient, R410A environmentally friendly refrigerant.Intelligent control
● Self-diagnosis, fault warning, rotational networking.
● Automatically adjust the operating status according to the cell temperature.Easy to install
● Can realize full front maintenance, easy to operate.
● Product integrated design, easy to install, easy to transport in centralized box or wall-mounted installation, easy to operate, no complicated operation, it can run automatically when it is powered on.
● The installation of the air conditioner does not intersect with the internal construction of the container to achieve more efficient installation and commissioning.
● Provide alarm signal and digital communication interface, when an abnormality occurs, the alarm signal will be output, and monitoring, control, etc. can be realized through the communication interface.Rigorous testing
● Condensation verification.
● Full safety testing.● High pressure spray waterproof test.
● Frequent start and stop to verify oil return and liquid return.
● Piping stress, piping vibration verification.
● Wide voltage (at least ±15% fluctuation range) operation.
● Severe high temperature (at least 43°C), low temperature (-20°C) operation verification.
-
Model VCE007UUCE122 VCE010UUCE122 VCE012UUDE122 VCE015UUDE122 VCE020UUDE122 Configurattion Total Cooling Capacity(kW) 7.5 10 12.5 15.5 20.5 Air Volume(m3/h) 2500 3000 3200 5000 6000 Reheating capacity(kW) 5.5 6 9 Cooling way Cooling only/Constant temperature Refrigerant R410A Compressor DC frequency conversion Fan type EC IP Grade IP20 Power parameters Power way 220V 1PH~50Hz/60Hz 380V 3PH~50Hz/60Hz Current@100% laods(cooling only) 16A 23A 22A 14A 18A Current@100% laods(Constant Tem.) 26A 30A 22A 14A 18A Dimension and Weight Width(mm) 700 800 Depth(mm) 550 650 Height(mm) 1800 2100 Installation way Floor and Wall Mounted Application Ambient Indoor Weight(kgs) 163 165 185 215 234 Model VCE007UFCE121 VCE010UFCE121 VCE012UFCE121 VCE015UFDE121 VCE020UFDE121 Configurattion Total Cooling Capacity(kW) 7.5 10 12.5 15.5 20.5 Air Volume(m3/h) 2500 3000 3200 5000 6000 Reheating capacity(kW) 5.5 6 Cooling way Cooling only/Constant temperature Refrigerant R410A Compressor DC frequency conversion Fan type EC IP Grade IP55 Power parameters Power way 220V 1PH~50Hz/60Hz 380V 3PH~50Hz/60Hz Current@100% laods(cooling only) 16A 23A 22A 14A 18A Current@100% laods(Constant Tem.) 26A 30A 22A 14A 18A Dimension and Weight Width(mm) 700 800 Depth(mm) 600 700 Height(mm) 1950 2100 Installation way Floor and Wall Mounted Application Ambient Outdoor Weight(kgs) 173 175 210 218 238 -
Features
Specifications
Certification
Download
Convenient and reliable
● Integrated design, plug and play, complete isolation from inside and outside.
● Open protocol, support control according to cell temperature, more flexible on-site application.
● Independent cooling and heating set point control, closer to the actual operation of the battery.
● High protection level - IP55 protection level to ensure the dustproof and waterproof reliability of the chassis.
● The exterior of the chassis is sprayed with outdoor powder to improve the weather resistance and corrosion resistance of the unit.
● The EC fan has a large air volume and high residual pressure design, which can cope with the situation of adding air ducts on site.
● Adapt to local conditions
● Support multi-scene installation: wall-mounted, floor-standing, ceiling-mounted, indoor/outdoor.
Energy saving and environmental protection
● True frequency conversion, more energy efficient, R410A environmentally friendly refrigerant.
Intelligent control
● Self-diagnosis, fault warning, rotational networking.
● Automatically adjust the operating status according to the cell temperature.
Easy to install
● Can realize full front maintenance, easy to operate.
● Product integrated design, easy to install, easy to transport in centralized box or wall-mounted installation, easy to operate, no complicated operation, it can run automatically when it is powered on.
● The installation of the air conditioner does not intersect with the internal construction of the container to achieve more efficient installation and commissioning.
● Provide alarm signal and digital communication interface, when an abnormality occurs, the alarm signal will be output, and monitoring, control, etc. can be realized through the communication interface.
Rigorous testing
● Condensation verification.
● Full safety testing.
● High pressure spray waterproof test.
● Frequent start and stop to verify oil return and liquid return.
● Piping stress, piping vibration verification.
● Wide voltage (at least ±15% fluctuation range) operation.
● Severe high temperature (at least 43°C), low temperature (-20°C) operation verification.
| Model | VCE007UUCE122 | VCE010UUCE122 | VCE012UUDE122 | VCE015UUDE122 | VCE020UUDE122 | |
| Configurattion | Total Cooling Capacity(kW) | 7.5 | 10 | 12.5 | 15.5 | 20.5 |
| Air Volume(m3/h) | 2500 | 3000 | 3200 | 5000 | 6000 | |
| Reheating capacity(kW) | 5.5 | 6 | 9 | |||
| Cooling way | Cooling only/Constant temperature | |||||
| Refrigerant | R410A | |||||
| Compressor | DC frequency conversion | |||||
| Fan type | EC | |||||
| IP Grade | IP20 | |||||
| Power parameters | Power way | 220V 1PH~50Hz/60Hz | 380V 3PH~50Hz/60Hz | |||
| Current@100% laods(cooling only) | 16A | 23A | 22A | 14A | 18A | |
| Current@100% laods(Constant Tem.) | 26A | 30A | 22A | 14A | 18A | |
| Dimension and Weight | Width(mm) | 700 | 800 | |||
| Depth(mm) | 550 | 650 | ||||
| Height(mm) | 1800 | 2100 | ||||
| Installation way | Floor and Wall Mounted | |||||
| Application Ambient | Indoor | |||||
| Weight(kgs) | 163 | 165 | 185 | 215 | 234 | |
| Model | VCE007UFCE121 | VCE010UFCE121 | VCE012UFCE121 | VCE015UFDE121 | VCE020UFDE121 | |
| Configurattion | Total Cooling Capacity(kW) | 7.5 | 10 | 12.5 | 15.5 | 20.5 |
| Air Volume(m3/h) | 2500 | 3000 | 3200 | 5000 | 6000 | |
| Reheating capacity(kW) | 5.5 | 6 | ||||
| Cooling way | Cooling only/Constant temperature | |||||
| Refrigerant | R410A | |||||
| Compressor | DC frequency conversion | |||||
| Fan type | EC | |||||
| IP Grade | IP55 | |||||
| Power parameters | Power way | 220V 1PH~50Hz/60Hz | 380V 3PH~50Hz/60Hz | |||
| Current@100% laods(cooling only) | 16A | 23A | 22A | 14A | 18A | |
| Current@100% laods(Constant Tem.) | 26A | 30A | 22A | 14A | 18A | |
| Dimension and Weight | Width(mm) | 700 | 800 | |||
| Depth(mm) | 600 | 700 | ||||
| Height(mm) | 1950 | 2100 | ||||
| Installation way | Floor and Wall Mounted | |||||
| Application Ambient | Outdoor | |||||
| Weight(kgs) | 173 | 175 | 210 | 218 | 238 | |
Related Application Cases
Related Products
Rack Precision Cooling System(3.7-12.5kW)
It's the special air conditioner for circularly cooling the internal air of the 19-inch server cabinet, provides stable and reliable temperature and humidity regulation services, improves the stability and reliability of all kinds of equipment in IT cabinet, the product can be used with our iSmart and iWit.
In-row Precision Cooling System(12.5-60kW)
Especially suitable for modular or container data centers. The series precision cooling system is configured high-efficiency variable frequency compressor, EC backward inclined centrifugal fan, and full variable frequency design, It's usually installed side by side with the server cabinet, creating an ideal operating environment for the key infrastructure of the data center.
Inverter Small Room Precision Cooling System(5.5-32kW)
The cooling system is tailor-made for small IT room and equipment room. Equipped with EC fans, compared with traditional fans, the energy saving is more than 30%. Adopts the GMCC frequency conversion compressor which can match the output according to the demand. It supports checking 30 days of temperature and humidity curve data.
Inverter Large Room Precision Cooling System(25-120kW)
It's modular design, fast and flexible assembly on site without cutting copper tubing, support 100% front maintenance, support web access and email notice, can adapt to outdoor 55℃ high temperature, the 10-inch toch color LCD can meet the 30-day temperature and humidity curve and data display.
Sign Up For Email
I'd like to receive news and commercial info from INVT Power via electronic communication such as email.
Copyright © Invt Power System(ShenZhen) Co., Ltd. 粤ICP备10226515号
Online Message