VCE Series Energy Storage System Cooling(7.5-20.5kW)
Email Us
- Product description
- Features
- Specifications
- Application Case
- Download
-
VCE Series Energy Storage System Cooling is an intelligent temperature control product specially designed and developed for power control, energy storage container, and small data room. Adjust and control the battery temperature to improve the safety and stability of battery operation. In addition, this product can also be adapted with our iLegend Series Container Data Center.
-
VCE Series Energy Storage System Cooling is designed with integrated frequency conversion, featuring high energy efficiency, easy installation, intelligent control, and high safety and reliability. This series of products are classified into constant temperature type and cooling type by function, and into wall-mounted, ground-mounted, and ceiling-mounted by mounting pattern.
Convenient and reliable
• Integrated design, plug and play, complete isolation from inside and outside.
• Open protocol, support control according to cell temperature, more flexible on-site application.
• Independent cooling and heating set point control, closer to the actual operation of the battery.
• High protection level - IP55 protection level to ensure the dustproof and waterproof reliability of the chassis.
• The exterior of the chassis is sprayed with outdoor powder to improve the weather resistance and corrosion resistance of the unit.
• The EC fan has a large air volume and high residual pressure design, which can cope with the situation of adding air ducts on site.Adapt to local conditions
• Support multi-scene installation: wall-mounted, floor-standing, ceiling-mounted, indoor/outdoor.Energy saving and environmental protection
• True frequency conversion, more energy efficient, R410A environmentally friendly refrigerant.Intelligent control
• Self-diagnosis, fault warning, rotational networking.
• Automatically adjust the operating status according to the cell temperature.Easy to install
• Can realize full front maintenance, easy to operate.
• Product integrated design, easy to install, easy to transport in centralized box or wall-mounted installation, easy to operate, no complicated operation, it can run automatically when it is powered on.
• The installation of the air conditioner does not intersect with the internal construction of the container to achieve more efficient installation and commissioning.
• Provide alarm signal and digital communication interface, when an abnormality occurs, the alarm signal will be output, and monitoring, control, etc. can be realized through the communication interface.Rigorous testing
• Condensation verification.
• Full safety testing.
• High pressure spray waterproof test.
• Frequent start and stop to verify oil return and liquid return.
• Piping stress, piping vibration verification.
• Wide voltage (at least ±15% fluctuation range) operation.
• Severe high temperature (at least 43°C), low temperature (-20°C) operation verification. -
Model VCE007UUCE122 VCE010UUCE122 VCE012UUDE122 VCE015UUDE122 VCE020UUDE122 Configurattion Total Cooling Capacity(kW) 7.5 10 12.5 15.5 20.5 Air Volume(m3/h) 2500 3000 3200 5000 6000 Reheating capacity(kW) 5.5 6 9 Cooling way Cooling only/Constant temperature Refrigerant R410A Compressor DC frequency conversion Fan type EC IP Grade IP20 Power parameters Power way 220V 1PH~50Hz/60Hz 380V 3PH~50Hz/60Hz Current@100% laods(cooling only) 16A 23A 22A 14A 18A Current@100% laods(Constant Tem.) 26A 30A 22A 14A 18A Dimension and Weight Width(mm) 700 800 Depth(mm) 550 650 Height(mm) 1800 2100 Installation way Floor and Wall Mounted Application Ambient Indoor Weight(kgs) 163 165 185 215 234 Model VCE007UFCE121 VCE010UFCE121 VCE012UFCE121 VCE015UFDE121 VCE020UFDE121 Configurattion Total Cooling Capacity(kW) 7.5 10 12.5 15.5 20.5 Air Volume(m3/h) 2500 3000 3200 5000 6000 Reheating capacity(kW) 5.5 6 Cooling way Cooling only/Constant temperature Refrigerant R410A Compressor DC frequency conversion Fan type EC IP Grade IP55 Power parameters Power way 220V 1PH~50Hz/60Hz 380V 3PH~50Hz/60Hz Current@100% laods(cooling only) 16A 23A 22A 14A 18A Current@100% laods(Constant Tem.) 26A 30A 22A 14A 18A Dimension and Weight Width(mm) 700 800 Depth(mm) 600 700 Height(mm) 1950 2100 Installation way Floor and Wall Mounted Application Ambient Outdoor Weight(kgs) 173 175 210 218 238
Features
Specifications
Application Case
Download
VCE Series Energy Storage System Cooling is designed with integrated frequency conversion, featuring high energy efficiency, easy installation, intelligent control, and high safety and reliability. This series of products are classified into constant temperature type and cooling type by function, and into wall-mounted, ground-mounted, and ceiling-mounted by mounting pattern.
Convenient and reliable
• Integrated design, plug and play, complete isolation from inside and outside.
• Open protocol, support control according to cell temperature, more flexible on-site application.
• Independent cooling and heating set point control, closer to the actual operation of the battery.
• High protection level - IP55 protection level to ensure the dustproof and waterproof reliability of the chassis.
• The exterior of the chassis is sprayed with outdoor powder to improve the weather resistance and corrosion resistance of the unit.
• The EC fan has a large air volume and high residual pressure design, which can cope with the situation of adding air ducts on site.
Adapt to local conditions
• Support multi-scene installation: wall-mounted, floor-standing, ceiling-mounted, indoor/outdoor.
Energy saving and environmental protection
• True frequency conversion, more energy efficient, R410A environmentally friendly refrigerant.
Intelligent control
• Self-diagnosis, fault warning, rotational networking.
• Automatically adjust the operating status according to the cell temperature.
Easy to install
• Can realize full front maintenance, easy to operate.
• Product integrated design, easy to install, easy to transport in centralized box or wall-mounted installation, easy to operate, no complicated operation, it can run automatically when it is powered on.
• The installation of the air conditioner does not intersect with the internal construction of the container to achieve more efficient installation and commissioning.
• Provide alarm signal and digital communication interface, when an abnormality occurs, the alarm signal will be output, and monitoring, control, etc. can be realized through the communication interface.
Rigorous testing
• Condensation verification.
• Full safety testing.
• High pressure spray waterproof test.
• Frequent start and stop to verify oil return and liquid return.
• Piping stress, piping vibration verification.
• Wide voltage (at least ±15% fluctuation range) operation.
• Severe high temperature (at least 43°C), low temperature (-20°C) operation verification.
| Model | VCE007UUCE122 | VCE010UUCE122 | VCE012UUDE122 | VCE015UUDE122 | VCE020UUDE122 | |
| Configurattion | Total Cooling Capacity(kW) | 7.5 | 10 | 12.5 | 15.5 | 20.5 |
| Air Volume(m3/h) | 2500 | 3000 | 3200 | 5000 | 6000 | |
| Reheating capacity(kW) | 5.5 | 6 | 9 | |||
| Cooling way | Cooling only/Constant temperature | |||||
| Refrigerant | R410A | |||||
| Compressor | DC frequency conversion | |||||
| Fan type | EC | |||||
| IP Grade | IP20 | |||||
| Power parameters | Power way | 220V 1PH~50Hz/60Hz | 380V 3PH~50Hz/60Hz | |||
| Current@100% laods(cooling only) | 16A | 23A | 22A | 14A | 18A | |
| Current@100% laods(Constant Tem.) | 26A | 30A | 22A | 14A | 18A | |
| Dimension and Weight | Width(mm) | 700 | 800 | |||
| Depth(mm) | 550 | 650 | ||||
| Height(mm) | 1800 | 2100 | ||||
| Installation way | Floor and Wall Mounted | |||||
| Application Ambient | Indoor | |||||
| Weight(kgs) | 163 | 165 | 185 | 215 | 234 | |
| Model | VCE007UFCE121 | VCE010UFCE121 | VCE012UFCE121 | VCE015UFDE121 | VCE020UFDE121 | |
| Configurattion | Total Cooling Capacity(kW) | 7.5 | 10 | 12.5 | 15.5 | 20.5 |
| Air Volume(m3/h) | 2500 | 3000 | 3200 | 5000 | 6000 | |
| Reheating capacity(kW) | 5.5 | 6 | ||||
| Cooling way | Cooling only/Constant temperature | |||||
| Refrigerant | R410A | |||||
| Compressor | DC frequency conversion | |||||
| Fan type | EC | |||||
| IP Grade | IP55 | |||||
| Power parameters | Power way | 220V 1PH~50Hz/60Hz | 380V 3PH~50Hz/60Hz | |||
| Current@100% laods(cooling only) | 16A | 23A | 22A | 14A | 18A | |
| Current@100% laods(Constant Tem.) | 26A | 30A | 22A | 14A | 18A | |
| Dimension and Weight | Width(mm) | 700 | 800 | |||
| Depth(mm) | 600 | 700 | ||||
| Height(mm) | 1950 | 2100 | ||||
| Installation way | Floor and Wall Mounted | |||||
| Application Ambient | Outdoor | |||||
| Weight(kgs) | 173 | 175 | 210 | 218 | 238 | |
Related Application Cases
Related Products
VCS Series Rack Air Conditioner(3.7-12.5kW)
Range from 3.7kW to 12.5kW. It’s the special air conditioner for circularly cooling the internal air of the cabinet, which includes the integrated-type and split-type.
VCR Series In-row Precision AC (25kW-60kW)
VcolRow in-row computer room precision air conditioning units, range from 25-60KW, is a kind of intelligent temperature control product especially suitable for modular or container data center.
VCA Series Room Precision AC (5.5kW-32kW)
The VCA series room precision air conditioners are small room-level precision AC that provides temperature, humidity and cleanliness control for the installation site.
VCA Series Room Precision AC (25KW-120KW)
The VCA series room precision air conditioners are large room-level special IT coolings that provide internal environment temperature, humidity and cleanliness control for medium and large IDC computer rooms, communication equipment rooms, equipment rooms and other places.
Sign Up For Email
I'd like to receive news and commercial info from INVT Power via electronic communication such as email.
Copyright © Invt Power System(ShenZhen) Co., Ltd. 粤ICP备10226515号
Online Message